DraftWise Midland Insulation SolutionsDraftWise Midland Insulation Solutions

Open-cell foam insulation in Midland TX - an attic sealed tight without the upsell

Hot upstairs rooms and a climbing power bill usually mean air is leaking through your attic. Open-cell foam seals and insulates it at once.

Open-cell spray foam fills the roof and wall cavities between exposed wooden framing in an unfinished attic.
  • Licensed and fully insured.
  • Free in-person estimates.
  • We reply within 1 business day.

Is open-cell spray foam right for my Midland house?

Open-cell foam insulation in Midland is a spray foam we apply to your attic roofline, your walls or the room over the garage, where it swells to fill every gap, so it insulates and stops air leaks in the same layer.

Most calls start with an upstairs that won't cool down or a room over the garage that's drafty all year, and foam isn't always the answer. If the real trouble is gaps around lights and the hatch, attic air sealing may be all you need. When foam does fit, the price moves with how much roofline or wall we're covering, how thick the foam goes and whether old insulation has to come out first. The schedule turns on when your family can be out of the house and on any repairs I find up there. The written estimate I give you after I've been in your attic is where your own number comes from.

How do you know your attic could use foam?

  • Upstairs won't cool down

    The AC runs all afternoon and the bedrooms upstairs still feel stuffy. That usually means hot attic air is getting in through gaps in the ceiling, and every month you wait shows up on the power bill.

  • Drafts at lights and the hatch

    You can feel air moving around can lights, the attic hatch or where pipes come through the ceiling. Insulation sitting over those gaps is fighting a draft it can't win, and the house keeps pulling in attic dust and air until they're closed.

  • The room over the garage

    It's the one room that's hot when the rest of the house is fine and has cold floors when the weather turns. That usually comes down to thin insulation and open gaps where it meets the garage, and it doesn't fix itself.

  • Commercial insulation

    Shops, metal buildings and offices get their own walk-through, since a big open space and a business schedule change how the job runs.

  • Crawl space vapor barrier

    Damp dirt under a pier-and-beam house keeps the floors clammy, and covering it has to come before any insulation goes in down there.

How we install open-cell foam insulation

I start by telling you whether you need foam at all, because if your ducts don't run through the attic, sealing the gaps and topping up the loose fill usually does the job for less. When foam makes sense, I look at gas appliances, old wiring and old insulation first, since foam seals all of it in. Anything soaked or full of droppings comes out before we spray, and we cover whatever shouldn't get foam on it. Then our installers spray an even layer that's as thick at the edges as in the middle and trim it flush wherever it swells past the framing. Open cell is the cheaper foam and it stops air well, but you get less insulation per inch, and I'll tell you straight what that means for your house. If anyone at home has asthma or breathing trouble, tell me early so we can talk about other options.

Some calls reach past the house. Shops and metal buildings get the same look-first approach through our commercial insulation work. If your house sits over bare dirt, a crawl space vapor barrier keeps ground moisture away from the floor framing before anything gets insulated underneath.

  • Roofline foam for attics with ducts

    This suits a house whose ductwork and air handler sit in the attic, because foaming the underside of the roof puts them inside the sealed space. Without ducts up there, it's usually more than you need.

  • Wall cavities during a remodel

    This suits an addition or a remodel with the walls open, since foam fills tight around wires and pipes. It closes the small gaps that batts tend to leave behind.

Get a written open-cell foam estimate from the owner

Send it and we'll reply within 1 business day to set a time for me to come look. The estimate's free, there's no pressure to book, and calling (432) 218-4671 works too.

Call (432) 218-4671

Why Midland homeowners call us for open-cell foam

  • The owner checks before spraying

    I come out myself and look at gas appliances, old wiring and old insulation before anybody seals or sprays. Foam closes the house up, so a problem left in there only gets harder to reach later.

  • Sold this work, now install it

    I started out selling insulation for another company, got tired of seeing attics oversold, and went to work on an install crew before starting this business in 2013. You'll hear what your house can skip before you hear what it needs.

  • Licensed, insured and Midland-based

    We're licensed and fully insured, and our work is backed by our satisfaction guarantee. Midland is home, and our calls come from homeowners, landlords and folks with shops and metal buildings all around it.

On a foam job, what matters most is catching problems before the house gets sealed up. Set up a time for me to come out, or call (432) 218-4671.

What happens after you call about open-cell foam?

  1. Call or send the form

    You reach us at (432) 218-4671 or through the form, and we get back to you to set a time. Have the rooms that bother you most in mind so I know where to look first.

  2. I inspect and write it up

    I come out myself, get up in the attic or down in the crawl space and look for anything that needs fixing before foam goes on. You get a written estimate showing what I'd foam, what you can skip and what it costs, so there's no guessing.

  3. Our installers spray, I check

    Once you say go, our installers do the work while your household stays out for the time the safety guidance calls for. I check it over myself before we call it done.

Common questions

  • How much does open-cell spray foam cost in Midland, TX?

    Open-cell spray foam in Midland usually costs about $0.60 to $0.90 per board foot, which is one square foot of foam an inch thick. That's the going rate in the area, not our quote, and your own number comes in the written estimate after I've seen your attic.

  • Is open-cell or closed-cell spray foam better for my house?

    Open cell is the better pick when stopping air at a lower price matters most, and in Midland it's the less expensive of the two. It usually slows heat less per inch than closed cell, typically about 3.6 per inch on the R-value scale, and it lets water vapor pass through more easily. That's why we compare it with closed-cell foam for each house rather than defaulting to either.

  • How long do we have to stay out of the house after spray foam?

    Federal consumer safety guidance on spray foam says everyone should be out of the house for at least 24 hours. Plan a place for the kids and pets to stay, and we'll set the install date around when you can be away.

  • How do I know if spray foam is safe for someone with asthma?

    The same federal guidance says anyone with asthma, respiratory allergies, skin conditions or a past reaction to isocyanates, the chemicals that make spray foam, should read the product information carefully before going ahead. If it's a concern, another kind of insulation may suit your house better, so it's worth raising at the first visit.

  • Do I need a permit for spray foam insulation in Midland?

    Midland's Development Services Department issues residential permits for new construction, additions, remodeling, repairs and detached buildings, and that list doesn't name insulation, so ask the city whether your job needs one. If it does, we pull it as your contractor, the city takes applications online through PermitMidland, and we wait for it to be issued before we start. The city also says most construction projects need a licensed, bonded contractor registered with the City of Midland, which is a fair question for anyone you're comparing.

  • What causes a spray foam install to get pushed back?

    Usually conditions, because foam goes on right only when the air and surface temperature, the humidity and the dryness of the surfaces are where they need to be. On roofline jobs, a federal case study calls for roof wood that's dry, below 18% moisture, before spraying, so a recent roof leak has to dry out first. We'll tell you when we book if indoor conditions or the schedule need adjusting.

Find out if open-cell foam fits your house

Have the rooms you want insulated and any health history at home ready when you call (432) 218-4671 or fill out the form, and I'll come out to Midland, Odessa, Big Spring, West Odessa or the cities around them.

(432) 218-4671Request a quote