Closed-cell foam insulation in Midland TX - foam that seals out air and moisture
Drafts at the floor edges, a hot room over the garage or sweat on a shop wall? We seal and insulate where foam pays off.
- Licensed and fully insured.
- Free in-person estimates.
- We reply within 1 business day.
Is closed-cell foam worth the extra cost for your house?
Closed-cell foam insulation is a dense, rigid spray foam that insulates, stops air leaks and keeps moisture from passing through, all in one layer. At DraftWise Midland Insulation Solutions, we put it into Midland homes and buildings where those jobs count, mostly rim joists, damp spots and attics with ductwork.
Start with what your house doesn't need. In a lot of attics without ducts up there, sealing the gaps and topping up loose fill does the job for less, and I'll tell you if that's your case. Where foam does fit, the price moves with how much area we cover, how thick each spot needs to be, how hard it is to reach and whether old insulation has to come out first. The schedule turns on the stretch your household has to be out while the foam goes in, and on any permit, because if the city requires one for your job, we pull it as your contractor and wait until it's issued to start. Your written estimate spells out the area, the thickness and the price.
How do you know closed-cell foam is worth a look?
Drafts along the floor edges
You feel air at the baseboards or the floors run cold, and the leak is usually at the rim joist, the band of framing where your floor sits on the foundation. Until it's sealed, you're paying to heat and cool air that slips straight out.
Hot upstairs with attic ducts
The upstairs or the room over the garage stays hot while the AC runs and runs, and the ducts often snake through an attic that bakes all summer. Waiting means the power bill keeps carrying that heat.
Sweat on a metal building
Water beads on the inside of metal walls or the roof on cool mornings, because warm, damp air is hitting cold metal. Left alone, it drips on tools and stock and keeps rust going.
Other foam work worth comparing
Open-cell foam insulation
A softer, lower-cost foam for wide attic rooflines and dry spaces where water isn't the concern.
Commercial insulation
For shops, metal buildings and rentals where condensation and big open spaces call for their own plan.
How we install closed-cell foam insulation
Closed cell costs more, so I only push it where it earns its keep, like rim joists or spots where moisture is a worry. Before anybody sprays, we check the gas appliances, the wiring and the old insulation, and anything soaked or full of droppings comes out first so the problem doesn't stay trapped under the foam. Then our crew masks off the area, seals the gaps around pipes, wires and the hatch, sprays the foam in passes to the thickness that spot needs and cleans up before we leave.
If you've got a big roofline to cover and water isn't the worry, open-cell foam insulation can do it for less, and I'll say so. Landlords and folks with shops or metal buildings can ask about our commercial insulation work too. Midland is home, and we also work in Odessa, Big Spring, West Odessa and plenty of the cities around them.
Rim joists
This suits almost any house with a crawl space or a second floor, because a thin layer seals and insulates the joist in one step. It's where closed cell pays off the most.
Under the attic roof
This fits houses where the ducts and the AC equipment live in the attic, since foaming the underside of the roof brings them inside the house. If your ducts aren't up there, sealing and loose fill usually wins.
Metal buildings and damp spots
Shops, metal buildings and walls that sweat do well with closed cell because it won't soak up water. It sticks to metal and keeps the damp air off the cold surface.
Get a written estimate for closed-cell foam
We reply within 1 business day, then I come out and put a free in-person estimate in writing, with no pressure to book. Calling (432) 218-4671 works too.
Call (432) 218-4671Service areas
Why Midland homeowners call DraftWise Midland Insulation Solutions for closed-cell foam
Sold straight since 2013
I sold insulation for another company before I ran a crew, and I got tired of watching attics get oversold and under-sealed. We've been in business since 2013 on one idea, that you pay for what your house needs and nothing past that.
Safety checks before we spray
Before anybody seals or sprays, we look hard at the gas appliances, the old wiring and the old insulation in the space. Foam closes things up, so anything that needs fixing gets found while it's still easy to reach.
Licensed, insured and easy to check
We're licensed and fully insured. Midland's Code Administration registers contractors, verifies licensing and inspects permitted work, so you can check on any contractor with the city before you sign.
The biggest decision on this job is where the foam goes and where it doesn't, so let's look at it together. Set up a visit or call (432) 218-4671.
What happens after you call about closed-cell foam in Midland?
Call or send the form
You call (432) 218-4671 or fill out the form, and we get back to you to set a time. Tell us what's bugging you, like a drafty floor, a hot room upstairs or sweat on a shop wall.
I come out and look
I come out myself, get up in the attic or down in the crawl space and look for anything that needs fixing first. Your written estimate shows where foam earns its keep, where something cheaper does the job and what it all costs.
Our installers spray the foam
Once you say go and any permit is issued, our installers prep the space and put the foam in while your household is out. We'll tell you ahead of time how long to stay away for the product we use.
I check it before we finish
I go over the work myself before we call it done, and then we let you know when it's time to come back in. The job is backed by our satisfaction guarantee.
Common questions
How much does closed-cell spray foam insulation cost in Midland, TX?
Closed-cell spray foam in Midland usually costs about $1 to $1.50 per board foot, and a board foot is one square foot of foam one inch thick. That's one cost guide's figure for the local market, not our quote, and your total turns on the area, the thickness each spot needs and the prep that comes first. I'll put your number in writing after I see the job.
Why does closed-cell foam cost more than open-cell foam?
It takes more material to fill the same space, so you're paying for more foam. What that buys is a rigid foam that won't soak up water, which is worth it on a rim joist or a damp wall. In a dry spot with plenty of room, open-cell or sealing plus loose fill usually makes more sense for the money.
How long do we have to stay out of the house after spray foam insulation?
Federal consumer safety staff advise leaving home during the install and for at least 24 hours after, so plan somewhere else for the whole household, kids and pets included. Emissions vary with the foam and the house, so ask us about the re-entry time, when you can come back inside, and we'll tell you for the product we use. If anyone has asthma, respiratory allergies, a skin condition or has reacted before to isocyanates, a chemical in spray foam, the same staff say to read the product information first and consider other insulation if needed.
Do I need a permit for spray foam insulation in Midland?
The city says most construction projects need a building permit, so don't assume yours doesn't until you've asked. In Midland, the property owner or a licensed and bonded contractor acting for the owner gets the permit, and work starts only after it's issued. You can ask about your own job through the city's permit office.
Is closed-cell foam good for sealing rim joists?
Yes, it's one of the best uses for it, because federal energy guidance counts closed-cell foam as an air barrier on a rim joist at 1.5 inches or more, against 5.5 inches for open-cell. That means a thin layer seals and insulates the joist in one step, where open-cell has to go much thicker.
How do I keep repair work safe around spray foam in my house?
Tell any plumber, electrician or repair worker the foam is there and to keep heat and grinding off it. EPA guidance says spray foam can give off toxic emissions when it's heated or ground, which matters for soldering pipes or cutting into a wall later.
Find out where foam fits your house
Call (432) 218-4671 or use the form, and have ready the area you want insulated, where your attic ducts run and any health concerns at home so we can plan around them.